Gator Sealer Stripper
Description
Gator Sealer Stripper is extremely effective for removing sealer from concrete paver or stone. It is a paste, it is easily applied with a brush, or roller. Gator Sealer Stripper is formulated to remain wet and effective over extended periods. Always preform a test area to determine exact reacting time. To use, apply to surfaces with a brush, roller according to test patch results. Once is ready to be removed use power washer to strip surface. Be sure to scrub remaining residue with nylon brush and water. Allow surfaces to air dry before resealing.
- Will not burn skin
- Removes multi layers in a single application
- Environmentally responsible: water based
- Virtually no odor
- Zero VOC
- pH neutral – No neutralization necessary
- Shelf Life of 2 years if container and kept well sealed in a warm, and dry environment
PREPARATION
- Surface must be clean and dry.
- Wet down all vegetation before beginning.
- Protect and cover all areas such as vegetation.
- Solvent resistant polyethylene sheets can be used as an effective barrier.
- For best results, use above 50°F (10°C) and below 90°F (32°C)
APPLICATION
- Always work in smaller manageable areaswhen stripping.
- Use a brush or roller apply paste no less than a 1/8″ (3 mm) thick.
- On irregular surfaces use a nylon brush to force paste into intricate areas.
- Reaction time between 3-24 hours if necessary.
- Average spread rate of approximately 40-50 sq. ft.(3.7-4.6 sq. m.) per gallon; results may vary based on surfaces texture and porosity.